Carpentry Basics – 180 Hours – 10 Month Program – Course #118145.411 Start Date 9/8/25 – 5/18/26
Tentative end date is subject to change, as make-up days may be required Explore the many facets of work encompassed by the carpentry profession. Learn the development of plans from site and layout work through the construction of footings, foundations, floors, walls, roofs, ceilings, and finish work. Develop skills with tools and familiarization with the...
Electricity Basics Level 1 -180 Hours 10 Month Program – Course #118154.411 Start date 9/8/25-5/18/26
Tentative end date is subject to change, as make-up days may be required This course will introduce the student to the basic hand and power tools used on the job every day as well as tool safety and electrical safety procedures. Series and parallel circuits, circuit calculations, electrical materials such as boxes, wire and cable,...
Electricity Advanced Level 2 -150 Hours 10 Month Program – Course #118131.402 Start Date 9/9/25-6/2/26
Tentative end date is subject to change, as make- up days may be required Electricity Advanced – Level 2 is a 150-hour course. These academic course hours partially meet and can be applied towards the required hours for an Electricity Apprenticeship in New Jersey. Applicants must complete Electricity Basics – Level I before registering for...
Electricity Advanced Level 2 -150 Hours 10 Month Program – Course #118131.401 Start Date 9/8/25-6/22/26
Tentative end date is subject to change, as make-up days may be required Electricity Advanced – Level 2 is a 150-hour course. These academic course hours partially meet and can be applied towards the required hours for an Electricity Apprenticeship in New Jersey. Applicants must complete Electricity Basics – Level 1 before registering for Level...
Electricity Advanced Level 3 -150 Hours 10 Month Program – Course #118132.401 Start Date 9/11/25-6/18/26
Tentative end date is subject to change, as make-up days may be required Electricity Advanced – Level 3 is a 150 hour course. These academic course hours partially meet and can be applied towards the required hours for an Electricity Apprenticeship in New Jersey. Applicants must complete Level 1 and Level 2 before registering for...
Electricity Advanced Level 4 – 150 Hours – 10 Month Program – Course #118133.401 Start Date 9/11/25-6/18/26
Tentative end date is subject to change, as make-up days may be required Electricity Advanced – Level 4 is a 150-hour course. These academic course hours meet and can be applied towards the required hours for an Electricity Apprenticeship in New Jersey. Applicants must pass Level 1, Level 2 & Level 3 before registering for...
Protected: General Maintainer- Summer Course #118152.431 Start Date – 7/8/25 – 8/7/25
There is no excerpt because this is a protected post.
Handyman Specialist – Fall Course #118109.411 Start Date 9/6/25 – 1/24/26
Tentative end date is subject to change, as make-up days may be required. Learn the basic principles of electricity, carpentry, and plumbing. Upon completion, students will be able to perform the duties of a building superintendent. Get hands-on experience in each program for a total of 5 weeks and a certificate of completion will be...
Handyman Specialist – Spring Course #118109.421 Start Date 2/21/26 – 6/20/26
Tentative end date is subject to change, as make-up days may be required. Learn the basic principles of electricity, carpentry, and plumbing. Upon completion, students will be able to perform the duties of a building superintendent. Get hands-on experience in each program for a total of 5 weeks and a certificate of completion will be...
HVAC Basics – 180 Hours 10 Month Program – Course #118155.401 Start Date 9/9/25-5/14/26
Tentative end date is subject to change, as make-up days may be required. The basic vapor compression system will be taught. The types, principles, and operation of compressors, condensers, sub-cooling, liquid receivers, pump-down, filter dryers, sight glasses, metering devices, evaporators, superheat, and heat transfers will be introduced. This course will also focus on phase changes...
Plumbing Basics Level 1-180 Hours 10 Month Program – Course #118156.401 Start Date 9/8/25 – 5/18/26
Tentative end date is subject to change, as make-up days may be required Learn to identify basic plumbing tools, materials, fittings, valves, and fixtures. Hours of hands-on experience will teach the students to measure, cut, and assemble gas pipes, copper, PVC, and cast-iron pipes. Learn the purpose of traps, vents, back-flow preventers, and relief valves....
Plumbing Advanced Level 2-150 Hours 10 Month Program – Course #118126.401 Start Date 9/11/25-6/18/26
Tentative end date is subject to change, as make-up days may be required Plumbing Advanced – Level 2 is a 150-hour course. These academic course hours partially meet and can be applied toward the required hours for a Plumbing Apprenticeship in New Jersey. Applicants must complete Plumbing Basics – Level 1 before they can register...
Plumbing Advanced Level 3 -150 Hours 10 Month Program – Course #118127.401 Start Date 9/11/25-6/18/26
Tentative end date is subject to change, as make-up days may be required Plumbing Advanced Level 3 is a 150-hour course. These academic course hours partially meet and can be applied toward the required hours for a Plumbing Apprenticeship in New Jersey. Applicants must complete Level 1 and Level 2 before they can register for...
Plumbing Advanced Level 4 -150 Hours 10 Month Program – Course #118128.401 Start Date 9/11/25-6/18/26
Tentative end date is subject to change, as make-up days may be required Plumbing Advanced Level 4 is a 150-hour course. These academic course hours meet and can be applied toward the required hours for a Plumbing Apprenticeship in New Jersey. Applicants must pass Level 1, Level 2, and Level 3 before registering for Level...
25-26 Welding Fall All Levels
Tentative end date is subject to change, as make up days may be required This course is designed to give the beginner and novice welding student hours of instruction through lectures, one-on-one demonstrations, practical application, and experience in electric arc welding. An overview of safety, metal preparation, electrode selection, bead placement, and joint welding in...
25-26 Welding Spring All Levels
Tentative end date is subject to change, as make up days may be required This course is designed to give the beginner and novice welding student hours of instruction through lectures, one-on-one demonstrations, practical application, and experience in electric arc welding. An overview of safety, metal preparation, electrode selection, bead placement, and joint welding in...
OSHA 30-Hour Construction Course – (Voucher Included) – (VIRTUAL) – Course #118137.900
Course Description This OSHA 30 course is designed to educate workers on workplace and jobsite safety. Specifically, those who successfully complete this specialized training should become familiar with recognizing, avoiding, preventing and stopping potential jobsite hazards. Topics Covered Introduction to OSHA, fall protection, electrocution, struck-by, caught-in, personal protective equipment, health hazards, material handling, tools –...
OSHA 10-Hour Construction Course – (Voucher Included) – (VIRTUAL) – Course # 118157.900
Course Description This OSHA 10 course is designed to educate workers on workplace and jobsite safety. Specifically, those who successfully complete this specialized training should become familiar with recognizing, avoiding, preventing and stopping potential jobsite hazards. Topics Covered Introduction to OSHA, fall protection, electrocution, struck-by, caught-in, personal protective equipment (PPE), health hazards, material handling, tools...